3 way to fix BSOD of hardware and software using diagnostic card and safe mode | 100% fix bsod issue | informative blog

Heylow everyone

Errors are the fully frustrating thing but if you want to make it interesting by finding the perfect solution to solve it by not giving up on this because it can be incompatibility, bad ram, bad storage,snippet fail in motherboard, loose wires and may be software updates or any other issue.

The good thing is, it will start working as per your trying rate increases only if you're trying continuously and working on it, Software bsod(blue screen of death) problem arises on update and also the good thing in window operating systems include window 7,8,8.1 and 10 can automatically undo the change or updates if system failed to boot up in system.

We can do it by updating the perfect drivers if drivers isn't compatible with hardware than this blue screen can suddenly arrives while you working on some important projects, in many cases installation of correct driver can solve it.

NOTE: it Just undo the software changes only not hardware.

FOR HARDWARE:-

we need to undo the newest device we install previously over motherboard.
The bad thing is, Its come over and over if you have hardware issue, Try to change with good one if your have doubt with any hardware present in the CPU than take its out and put newest one.

PCI troubleshooting device

This device will show you which part of the motherboard is corrupted or damaged
It will show you 4 digit number or 2 pair of number show that specific part is corrupted but view more about diagnostic card..... is recommended
((Link of learning diagnostic training tutorial))
from where you will learn which pair is for such part of motherboard failures.

Note : - this device is only for checking hardware issue, The reason of motherboard and why its is not starting and this blog is for how you can get rid from bsod

But its makes lot different when you actually fighting with the bsod or blue screen of death you find different ways to troubleshooting your PC because it is not the one time process.

FOR SOFTWARE:-

Their is 3 way to solve bsod
(1) boot into safe mode
(2) restore
(3) repair or reinstall the window by bootable device

First and the best:-

(1) boot into safe mode
First and most informative thing -
If you boot into Safe Mode, you can use various diagnostic tools:

•System Restore•Various settings for your Windows version•Device Manager, where you can update and remove devices and drivers from your computer•Event Viewer•System Information, where you can view information about the hardware•Command Prompt•Registry Editor

Usually, you can choose from 3 options: Safe Mode, Safe Mode with Networking and Safe Mode With Command Prompt and know how to do

check:- how to boot in safe mode for all window version..

After booting up into the safe mode we can uninstall previous update by going in 'control panel' and click on the 'program' and select 'view install update' and here you can see the updates you have installed and you have to sort it by date and right click on the last update you have done and lastly click on the 'uninstall' and restart your PC it will restart normally.

Second and average:-

(2)restore
For restore the system please boot in to the safe mode and go to the control panel - recovery - open system restore and click on 'scan for affected program' this will list a program that affect you system and by clicking 'finish' you will remove the programs that harm your PC and system will restarts and the dialogue appears that system restore successfully.

Third and last:-

(3)repair or reinstall the window by bootable device
For reinstalling of new system you need to make new bootable pen drive or DVD and boot from that specific bootable drive and start the install process if you Don't know how to install the system than I will make a blog on it.


These are the three method that is preventing bsod from both software and hardware issues.

Thank you
comment below for more support